Montana Fixed Steel Angle Kits & Angles - 110º Peak & 125º Eaves
MONTANA ANGLES DIFFER BETWEEN MONTANA TENT SIZES. The majority of older Montana Tents take a 110 degree angle at the peak and 125 degree angles at the eaves. This has changed with the new Montana Tents. If you do not know the degree of angle your tent requires, please measure your Slope (B) and Tent Width (C) so we can determine the proper degree of angle needed. .
MONTANA angle kits can ship 3-5 DAYS after ordering. All Montana angles in stock.
PROVIDE MONTANA TENT SIZE ABOVE.
PROVIDE B & C TENT MEASUREMENTS IF YOU ARE NOT POSITIVE ANGLES REQUIRED ARE MONTANA ANGLES.
If your provided angle measurements are not for a Montana Tent you will be required to pay for custom angles.
Click canvas tent angle kits for instructions on how to measure tent for B & C measurements and for info on how to make a tent frame using angle kits..
We will calculate your degree of angles based on your tent measurements. Shipping angles to and from customer will not be reimbursed if you order the wrong angles or provide inaccurate tent measurements.
We have all Montana Tent measurements. We can provide the correct angles for your size of Montana Tent. You do not have to measure your tent- just provide your tent size.
Typical frame savings using an angle kit on a 12x14 internal frame is $300.
Strongly recommend you read Tent Frame Information and Recommendations before you build your frame or set up your tent.
A maximum distance of 6' is recommended between rafters. More than 6' causes a sag in the roof and significantly reduces snow load carrying capacity.
YOU MIGHT ALSO WANT TO ADD TO THIS ORDER
Rubber bottom caps. Rubber bottom caps are put on the bottom of your frame legs to protect your sod cloth or floor.
Frame bags. Frame bags are used to store and transport your frame poles.
10" Sleeves. Sleeves are used when the vehicle you are transporting your frame in is too short for your rafters. Cut the rafters in half and when setting up your frame , the sleeve connects the 2 piece rafters.
Leg Supports. Primarily used to attach tent frame legs to a platform. Tent legs can easily fall off a platform during high winds.