Wilderness Conduit Tent Frame
WILDERNESS FRAMES, MONTANA FRAMES AND CUSTOM CONDUIT FRAMES
I recommend you purchase an angle kit to make your frame out of conduit which will normally save you $100 to $400, including shipping, depending on what tent size you purchase.
However, if you don't want to make a conduit frame or don't have the time, we will make the frame for you.
We will ship the frame in 1-2 weeks after ordering.
Any questions on how to make a frame from conduit, view angle kit instructions. Also, call us if you have questions. Rich
Tent sizes and minimum rafters per size of WILDERNESS tent are listed in pricing chart. Rafters per tent size are the minimum required to insure proper roof support. If you anticipate heavy snow loads we recommend getting rafter spacing closer to 2'.
8 x 10: 3 rafters
10 x 12: 3 rafters
12 x 14: 4 rafters
14 x 16: 4 rafters
16 x 20 : 5 rafters
16 x 24: 6 rafters
WILDERNESS TENT FRAME INCLUDES
1 angle bag
Rubber bottom caps on all legs
12x14, 14x16, 16x20, & 16x24 tent sizes will have sleeved for 2 piece rafters.
Additional rafters are recommend if you anticipate heavy snow loads. With heavy snow loads we recommend brushing the snow off as frequently as you can and getting your rafter spacing closer to 2'. However, due to the variance in snow load, we cannot guarantee our frame will remaining standing under every snow load.
IF YOU HAVE A USED WILDERNESS TENT OR MONTANA TENT OR OTHER TENT BRAND, Click angle kit instructions for info on how to measure tent measurements A, B, C, D as required above. Write A, B, C, D measurements in box above.
Wilderness frame includes 1 angle bag. All legs will have rubber bottoms.
Poles are made of 1" EMT Conduit.
One person set up, no pins, bolts or clips
RAFTERS: A 10" coupler will be used for 2 piece rafters on all tents with a width of 12 feet or wider. 8 x 10 and 10 x 12 frames will have 1 piece rafters.
TENT LENGTHS - RIDGE/EAVES: 1 PIECE